The VS® ISI System is used for load-bearing connections of precast panels and columns as well as for connecting two walls. The blue clip inside the long boxes and rails indicates an approval-compliant system. Only products with identical blue clips can be combined together. The German Institute of Building Technology (DIBt) has issued a german approval for the VS® ISI System.
Joint filling with grout or plastic/thixotropic mortar possible
One load capacity for all mortars
Free dimensioning software
Can be installed in any direction
Safety guaranteed by maximum tolerances with any loop position
Low mortar consumption
General technical approval (abZ)
Maximum application versatility thanks to approved mortars - even in case of fire
Design resistances in every direction - also in case of fire
Product Info
Application areas
Precast wall (load bearing)
Precast wall (non-load bearing/structural)
Column
Function
If using the VS® ISI System, a VS® ISI Long Box T20 is always combined with a VS® ISI Rail T50 and connected by threading a reinforcement bar through their overlapping loops. The joint is then cast in place with a suitable mortar.
We supply two types of joint filling material: a self-compacting, free-flowing grouting material and an approval-compliant joint filling mortar with plastic, thixotropic properties.
Only manufacturers PAGEL® Spezial-Beton GmbH & Co. KG, P&T Technische Mörtel GmbH & Co. KG and BETEC® supply correspondingly approval-compliant mortars - even in the event of fire.
Erection of cable structure
More detailed information on installation can be found in the corresponding product brochure. This can be found under the "Downloads" tab.
Design / Engineering
Possible loads
Shear loads running parallel and perpendicular to the joint as well as tensile loads are regulated by the building authorities.
Interaction of influences from all three directions is permitted.
Calculation
The table of admissible design resistance values and related interaction diagrams are shown in the associated product brochure.
To make it easier for planners to produce standard-compliant designs, PFEIFER provides the PFEIFER Suite free dimensioning software for engineers and planners to download.
J&P Building Systems Pte Ltd.
No. 48 Toh Guan Road East, #08-104 Enterprise Hub
SG-Singapore 608586
Tel. +65 6569 6131
Fax +65 6569 5286
E-Mail info@jnp.com.sg
Web building-systems-sg.pfeifer.info
Sales subsidiary
Spain
PFEIFER Cables y Equipos de Elevación S.L.
Avda. de los Pirineos, 25 – Nave 20, San Sebastián de los Reyes
ES-28703 Madrid
Tel. +34 630 336-445
Fax +34 91 659-3139
E-Mail cconejero@pfeifer.es
Web www.pfeifer.es
Sales subsidiary
Spain
PFEIFER Cables y Equipos de Elevación S.L.
Avda. de los Pirineos, 25 – Nave 20, San Sebastián de los Reyes
ES-28703 Madrid
Tel. +34 91 659-3185
Fax +34 91 659-3139
E-Mail p-es@pfeifer.es
Web www.pfeifer.es
Sales subsidiary
Poland
PFEIFER Polska Sp. z o. o.
ul. Wrocławska 68
55-330 Krępice k. Wrocławia
Tel. +48 71 30 23 300
E-Mail info@pfeifer.pl
Web www.pfeifer.pl
Office
Spain
PFEIFER Cables y Equipos de Elevación S.L.
ES-08820 Barcelona
Tel. +34 93 636-4662
Fax +34 64 915-4948
E-Mail frieda@pfeifer.es
Web www.pfeifer.es
D2B Byggprodukter AB / B.T. innovation GmbH
Johans väg 3
438 93 Landvetter
Mr.
Magnus
Sanborn
Einkauf
Tel. +46 705 973 114
E-Mail magnus.sanborn@d2b-bygg.se
Web www.d2b-bygg.se
We use cookies to optimise our web page for you. By continuing to use the web page you agree to the use of cookies. Further information about cookies can be found in our data protection declaration.
Required cookies
Required cookies are mandatory for the basic functions of the website. Without these cookies, you will unfortunately not be able to use our website.
These cookies are always set when you use the website. No personal data is collected or stored.
Functional cookies
These cookies allow us to analyze website usage so that we can measure and improve its performance.
No personal data is collected or stored.
