The Fastener for push-pull props MoFi is installed in the surface of concrete walls or layers of double walls and serves as a safe, as well as technically qualified attachment point for braces during assembly. The anchor is used for the temporarily absorption of loads from wind or slight impact.
Screw locking - no unintentional loosening of screwed-in screws
Manual assembly possible - because no minimum torque
Robotic - placeable by formwork robot (MoFi 12)
Safe support in the wall panel - through counter-plate (MoFi 12)
Non-rotating - due to integrally formed flanks
Low minimum shell/wall thicknesses - from 50 mm
Suitable for use in waterproof components
CE marking
European Technical Assessment (ETA)
Product Info
Application areas
Double wall/semi-precast wall
Precast wall
Erection of cable structure
The original accessories suitable for the process must be used to fasten the MoFi to the formwork.
Robotic: An integrated metal disc in the yellow plastic cap of the MoFi 12 Robotic can be used to magnetically tighten or hold it in place. This means that it can be automatically placed on the formwork when electromagnetically picked up by the formwork robot. For the highest possible degree of automation, the inserted magnetic recess is suitable for formwork attachment, which must be pre-assembled on the MoFi.
Previous aptitude tests in the process are recommended.
Combinable products
Connection of the braces head to the MoFi: Fixing Bolt for MoFi
Formwork fixing: Plastic or Magnetic Fixing for MoFi
Recess closing: Plastic/Concrete Plug for MoFi
Design / Engineering
Possible loads
With the Fastener for push-pull props MoFi, loads from wind and light impact can be safely transferred to the base plate via the attached brace.
It should be noted that freestanding walls in building excavations can sometimes be exposed to strong wind loads.
Calculation
Detailed technical information on dimensioning and use can always be found in the currently valid European Technical Assessment ETA-18/0975.
For a quick selection of the suitable anchor/screw/bolt size - for brace fixings - the planner has the corresponding dimensioning tables available free of charge under the "Downloads" tab.
A minimum concrete quality of C20/25 is a precondition for the wall element for dimensioning a Fastener for push-pull props MoFi.
Videos
Installation instructions Fastening for push-pull props MoFi® / FS Box® for in-situ concrete
J&P Building Systems Pte Ltd.
No. 48 Toh Guan Road East, #08-104 Enterprise Hub
SG-Singapore 608586
Tel. +65 6569 6131
Fax +65 6569 5286
E-Mail info@jnp.com.sg
Web building-systems-sg.pfeifer.info
Sales subsidiary
Spain
PFEIFER Cables y Equipos de Elevación S.L.
Avda. de los Pirineos, 25 – Nave 20, San Sebastián de los Reyes
ES-28703 Madrid
Tel. +34 630 336-445
Fax +34 91 659-3139
E-Mail cconejero@pfeifer.es
Web www.pfeifer.es
Sales subsidiary
Spain
PFEIFER Cables y Equipos de Elevación S.L.
Avda. de los Pirineos, 25 – Nave 20, San Sebastián de los Reyes
ES-28703 Madrid
Tel. +34 91 659-3185
Fax +34 91 659-3139
E-Mail p-es@pfeifer.es
Web www.pfeifer.es
Sales subsidiary
Poland
PFEIFER Polska Sp. z o. o.
ul. Wrocławska 68
55-330 Krępice k. Wrocławia
Tel. +48 71 30 23 300
E-Mail info@pfeifer.pl
Web www.pfeifer.pl
Office
Spain
PFEIFER Cables y Equipos de Elevación S.L.
ES-08820 Barcelona
Tel. +34 93 636-4662
Fax +34 64 915-4948
E-Mail frieda@pfeifer.es
Web www.pfeifer.es
D2B Byggprodukter AB / B.T. innovation GmbH
Johans väg 3
438 93 Landvetter
Mr.
Magnus
Sanborn
Einkauf
Tel. +46 705 973 114
E-Mail magnus.sanborn@d2b-bygg.se
Web www.d2b-bygg.se
We use cookies to optimise our web page for you. By continuing to use the web page you agree to the use of cookies. Further information about cookies can be found in our data protection declaration.
Required cookies
Required cookies are mandatory for the basic functions of the website. Without these cookies, you will unfortunately not be able to use our website.
These cookies are always set when you use the website. No personal data is collected or stored.
Functional cookies
These cookies allow us to analyze website usage so that we can measure and improve its performance.
No personal data is collected or stored.
