INVERTO positioner

INVERTO positioner

INVERTO positioner for the safe and gentle turning of heavy, bulky loads of up to 30 t by 90°. Particularly suitable for tool moulds, injection moulding tools, steel coils and paper rolls.

Advantages
Standard design
Product variants
Additional options
Downloads
Custom-made solutions
Videos
Contact

Advantages

Protective – due to a frequency converter the turning procedure starts and ends slowly in order to reduce the turning time to a minimum by means of rapid drive in the middle.
Safe – by enhoused or integrated safety bumpers (see standard design "safety kit").
Mobile – due to fork lifter clearances, the positioner can be transported to various locations of use. A simple 400 V plug is enough to connect the positioner with the power supply.
Flexible – by different table surface options: – for coils table surface with central clearance for easy loading and unloading by means of a coil hook or V-shaped cover.– for injection moulds: table surfaces without clearances.

Standard design

Gear system

2legged turnover gear system by geared motor and chain

Safety equipment

Turnover procedure can be stopped at any time and in each position by emergency stop.
Two flashing lights signalise the turnover procedure optically.
Acoustic warning signal when turnover procedure is started.

Operation

Radio remote control (in case of integrated safety rails) or stationary control key (in case of housing).

Supply

Completely ready to operate with 400V-CEE plug socket.
Electrical supply lines, anchoring bolts if necessary or foundation works as well as safety fences are to be arranged for by the client.
Incl. integrated load cycle meter

Optional safety packages

Safety rails: Safety rails at the upper side of the basis frame cutting off the turnover procedure in case of clamping or crushing hazard.
Fence with safety light barriers: safety fence with transceiver, passive reflectors and cable conduits. Can easily be installed on site.

Load

Places of loading and unloading are on opposite sides.
Best suitable for Hand pallet truck, Coil hook and Telescope coil grab.

Product variants

Positioner INVERTO 0 700mm x900mmx900mm

Reference no.	283550
Working load limit max [t]	2
Table Top Length [mm]	900
Table Top Width [mm]	700
Table Top Height [mm]	900
Table Height [mm]	465
Rated output [kW]	1.1
Voltage [V]	400
Frequency [Hz]	50
Weight approx. [kg]	560
Distance of centre of gravity from one table surface max [mm]	430
Out-of-centre gravity diagonal to the turning direction [mm]	± 100
Turning Time [s]	25
Turning angle [°]	90

Positioner INVERTO 1 1300mm x1300mmx1000mm

Reference no.	261309
Working load limit max [t]	8
Table Top Length [mm]	1300
Table Top Width [mm]	1000
Table Top Height [mm]	1300
Table Height [mm]	650
Cut-Out Width [mm]	300
Rated output [kW]	2.3
Voltage [V]	400
Frequency [Hz]	50
Weight approx. [kg]	1260
Distance of centre of gravity from one table surface max [mm]	650
Out-of-centre gravity diagonal to the turning direction [mm]	± 100
Turning Time [s]	35
Turning angle [°]	90

Positioner INVERTO 15 1500mm x1500mmx1200mm

Reference no.	259925
Working load limit max [t]	15
Table Top Length [mm]	1500
Table Top Width [mm]	1200
Table Top Height [mm]	1500
Table Height [mm]	830
Cut-Out Width [mm]	400
Rated output [kW]	4.7
Voltage [V]	400
Frequency [Hz]	50
Weight approx. [kg]	2300
Distance of centre of gravity from one table surface max [mm]	875
Out-of-centre gravity diagonal to the turning direction [mm]	± 100
Turning Time [s]	35
Turning angle [°]	90

Positioner INVERTO 30 2000mm x2000mmx1500mm

Reference no.	258129
Working load limit max [t]	30
Table Top Length [mm]	2000
Table Top Width [mm]	1500
Table Top Height [mm]	2000
Table Height [mm]	1100
Cut-Out Width [mm]	500
Rated output [kW]	4.7
Voltage [V]	400
Frequency [Hz]	50
Weight approx. [kg]	4800
Distance of centre of gravity from one table surface max [mm]	1000
Out-of-centre gravity diagonal to the turning direction [mm]	± 100
Turning Time [s]	60
Turning angle [°]	90

Working load limit max [t] 2

Table Top Length [mm] 900

Table Top Width [mm] 700

Table Top Height [mm] 900

Turning Time [s] 25

Reference no. 283550

Positioner INVERTO 30 2000mm x2000mmx1500mm

Reference no.	258129
Working load limit max [t]	30
Table Top Length [mm]	2000
Table Top Width [mm]	1500
Table Top Height [mm]	2000
Table Height [mm]	1100
Cut-Out Width [mm]	500
Rated output [kW]	4.7
Voltage [V]	400
Frequency [Hz]	50
Weight approx. [kg]	4800
Distance of centre of gravity from one table surface max [mm]	1000
Out-of-centre gravity diagonal to the turning direction [mm]	± 100
Turning Time [s]	60
Turning angle [°]	90

Working load limit max [t] 8

Table Top Length [mm] 1300

Table Top Width [mm] 1000

Table Top Height [mm] 1300

Turning Time [s] 35

Reference no. 261309

Positioner INVERTO 30 2000mm x2000mmx1500mm

Reference no.	258129
Working load limit max [t]	30
Table Top Length [mm]	2000
Table Top Width [mm]	1500
Table Top Height [mm]	2000
Table Height [mm]	1100
Cut-Out Width [mm]	500
Rated output [kW]	4.7
Voltage [V]	400
Frequency [Hz]	50
Weight approx. [kg]	4800
Distance of centre of gravity from one table surface max [mm]	1000
Out-of-centre gravity diagonal to the turning direction [mm]	± 100
Turning Time [s]	60
Turning angle [°]	90

Working load limit max [t] 15

Table Top Length [mm] 1500

Table Top Width [mm] 1200

Table Top Height [mm] 1500

Turning Time [s] 35

Reference no. 259925

Positioner INVERTO 30 2000mm x2000mmx1500mm

Reference no.	258129
Working load limit max [t]	30
Table Top Length [mm]	2000
Table Top Width [mm]	1500
Table Top Height [mm]	2000
Table Height [mm]	1100
Cut-Out Width [mm]	500
Rated output [kW]	4.7
Voltage [V]	400
Frequency [Hz]	50
Weight approx. [kg]	4800
Distance of centre of gravity from one table surface max [mm]	1000
Out-of-centre gravity diagonal to the turning direction [mm]	± 100
Turning Time [s]	60
Turning angle [°]	90

Working load limit max [t] 30

Table Top Length [mm] 2000

Table Top Width [mm] 1500

Table Top Height [mm] 2000

Turning Time [s] 60

Reference no. 258129

Positioner INVERTO 30 2000mm x2000mmx1500mm

Reference no.	258129
Working load limit max [t]	30
Table Top Length [mm]	2000
Table Top Width [mm]	1500
Table Top Height [mm]	2000
Table Height [mm]	1100
Cut-Out Width [mm]	500
Rated output [kW]	4.7
Voltage [V]	400
Frequency [Hz]	50
Weight approx. [kg]	4800
Distance of centre of gravity from one table surface max [mm]	1000
Out-of-centre gravity diagonal to the turning direction [mm]	± 100
Turning Time [s]	60
Turning angle [°]	90

Additional options

Table top with prism

Table top with prism

Table top with prism for preventing the horizontally positioned coils from rolling down.

PU-cover for loads with sensitive surfaces.

PU-cover for loads with sensitive surfaces.

PU cover of the table top or the prism.

180° slewing unit

180° slewing unit

Integrated into the table basis – with high-quality ball-bearing slewing rim for slewing the turning table by 180°. Loading and unloading the turning table possible from the same side!

Spring Cable Reel

Spring Cable Reel

Cable length 15 mts.

Manufacture also according to customer's requests

Manufacture also according to customer's requests

Just ask us!

Downloads

Description

Product brochure

Download

Product brochure

Download

Custom-made solutions

Positioner for fleece rolls

Positioner for fleece rolls

For turning of fleece rolls on paletts. Accessible by fork lifter. Carrying capacity 1,000 kgs.

Positioner on rails

Positioner on rails

For the turning of steel coils. With electrically moveable support plate and bowl. Driving on rails via battery. Turning process in fixed position with power supply. Carrying capacity 20,000 kgs.

Positioner for large injection moulds

Positioner for large injection moulds

For turning of injection moulds. Dimension table top 3000x2000x3000 mm. Carrying capacity 32,000 kgs.

Videos

Contact

Market	Contact	Location type
All other markets	PFEIFER Seil- und Hebetechnik GmbH Dr.-Karl-Lenz-Strasse 66 DE-87700 Memmingen Tel. +49 8331 937-636 Fax +49 8331 937-375 E-Mail hebetechnik@pfeifer.de Web www.pfeifer.info	Parent company/Head office
Germany	PFEIFER Seil- und Hebetechnik GmbH Dr.-Karl-Lenz-Strasse 66 DE-87700 Memmingen Tel. +49 8331 937-636 Fax +49 8331 937-375 E-Mail hebetechnik@pfeifer.de Web www.pfeifer.info	Parent company/Head office
USA	PFEIFER Wire Rope & Lifting Technology Inc. 2023 Humble Westfield US-Houston, TX 77037 Tel. +1 832 827 2923 Fax +1 281 784 2903 E-Mail info@pfeifer.us.com Web www.pfeifer.us.com	Service centre
Austria	PFEIFER Seil- und Hebetechnik GmbH Harterfeldweg 2 AT-4481 Asten Tel. +43 7224 662 24-0 Fax +43 7224 662 24-13 E-Mail info@pfeifer-austria.at Web www.pfeifer-austria.at	Sales subsidiary
China	PFEIFER Steel Wire Rope (Shanghai) Co., Ltd. Building 1, No. 366 Chen Xiang Road, Nanxiang Town, Jiading District CN-Shanghai 201802 Industrieseile/Industry ropes Tel. +86 21 56 77 80 06 Fax +86 21 56 77 92 29 E-Mail info@pfeifer.com.cn Web www.pfeifer.com.cn	Sales subsidiary
France	PFEIFER SOGEQUIP S.à.r.l. Zone Ind. Schifflange-Foetz LU-3844 Schifflange Tel. +33 676 54 42 68 / +352 57 42-42 Fax +352 57 42-62 E-Mail info@pfeifer-sogequip.lu Web www.pfeifer-sogequip.lu	Sales subsidiary
Great Britain	PFEIFER Rope & Tackle Ltd. Unit 1A1, Marchwood Industrial Park, North Road GB-Southampton SO40 4BL Tel. +44 23 8066-5470 Fax +44 23 8066-5471 E-Mail sales@ropeandtackle.com Web www.pfeifer-rt.com	Sales subsidiary
Hungary	PFEIFER Garant Kft. Gyömrői út 108-126 HU-1103 Budapest Tel. +36 1 260 10 14 Fax +36 1 262 09 27 E-Mail info@pfeifer-garant.hu Web www.pfeifer-garant.hu	Sales subsidiary
Luxemburg	PFEIFER SOGEQUIP S.à.r.l. Zone Ind. Schifflange-Foetz LU-3844 Schifflange Tel. +352 57 42-42 Fax +352 57 42-62 E-Mail info@pfeifer-sogequip.lu Web www.pfeifer-sogequip.lu	Sales subsidiary
Russia	OOO PFEIFER Kanati & Podjömnie Tehnologii Pyzhevskiy pereulok, h. 5, bld.1, office 108 RU-119017 Moskau Tel. +7 495 363 01-27 Fax +7 495 363 01-28 E-Mail info@pfeiferrussia.ru Web www.pfeiferrussia.ru	Sales subsidiary
Spain	PFEIFER Cables y Equipos de Elevación S.L. Avda. de los Pirineos, 25 – Nave 20, San Sebastián de los Reyes ES-28703 Madrid Tel. +34 630 336-445 Fax +34 91 659-3139 E-Mail cconejero@pfeifer.es Web www.pfeifer.es	Sales subsidiary
Spain	PFEIFER Cables y Equipos de Elevación S.L. Avda. de los Pirineos, 25 – Nave 20, San Sebastián de los Reyes ES-28703 Madrid Tel. +34 91 659-3185 Fax +34 91 659-3139 E-Mail p-es@pfeifer.es Web www.pfeifer.es	Sales subsidiary
USA	PFEIFER Wire Rope & Lifting Technology Inc. 600 Industry Drive US-Hampton, VA 23661 Tel. +1 757 825 2544 Fax +1 757 825 2546 E-Mail info@pfeifer.us.com Web www.pfeifer.us.com	Sales subsidiary
Australia	J. Blackwood & Son Limited 13 Cooper Street AU-2164 Smithfield, NSW. 2164 Tel. +61 29 20 30 111 Fax +61 29 20 30 549 Web www.blackwoods.com.au	Agency
Switzerland	pewag Suisse AG Hasentalstrasse 8 CH-8934 Knonau Tel. +41 44 768 55-55 Fax +41 44 768 55-30 E-Mail info@pewag-suisse.ch Web www.pewag-suisse.ch	Agency
Turkey	Ege Makina Ticaret Ve Sanayi Ltd. STI Yenisehir Mah. Turgut, Ösal Bulvari No: 54 TR-34779 Atasehir – Istanbul Tel. +90 216 456 76 46 Fax +90 216 456 71 34 E-Mail info@abusvinc.com Web www.abusvinc.com	Agency

Feel free to contact us

Tel.

+49 8331 937-636

E-Mail

hebetechnik@pfeifer.de

Inquiry

please leave empty!

Mr Mrs

* Required fields

Send me a copy.

I consent to my data being processed in accordance with the data protection declaration.

Cookie settings

We use cookies to optimise our web page for you. By continuing to use the web page you agree to the use of cookies. Further information about cookies can be found in our data protection declaration.

Required cookies

Required cookies are mandatory for the basic functions of the website. Without these cookies, you will unfortunately not be able to use our website. These cookies are always set when you use the website. No personal data is collected or stored.

Functional cookies

These cookies allow us to analyze website usage so that we can measure and improve its performance. No personal data is collected or stored.

Data protection declaration